Serving the Maryland, Washington D.C. & N. Virginia Areas

Serving the Maryland, Washington & Virginia Areas

5 common commercial office window cleaning mistakes to avoid

commercial office window cleaning mistakes

For most people, window washing seems like a pretty simple concept. And why not? All you need is a little soap and water to get the job done, right? You may be surprised to learn that washing windows is actually much more complicated– that is, assuming you want it done properly. Otherwise, poor commercial office window cleaning mistakes can leave you with smudged windows that look worse than when you started. The smallest mistake can thwart your cleaning efforts and even put window cleaning technicians at risk for injury.

When cleaning commercial office windows, here are five common mistakes to avoid:

Cleaning Windows in the Wrong Weather Conditions

If you’re cleaning windows in the wrong weather, several issues can arise. If it’s too sunny out, it’s nearly impossible to avoid smudges. Ideally, you will want to work when it’s cooler so that you have more time to clean before the sun starts to dry the soap on the glass.

Washing windows on days when there is rain in the forecast can also create streaks and stains. Rain, snow, and other precipitation will undermine everything you hope to accomplish with your cleaning. Therefore, it’s best to be patient and wait until you have ideal weather conditions to complete the job.

Not Putting Safety First

Ignoring safety risks causes several deaths per year among window washers. Safety standards should always be top of mind when performing commercial office window cleaning services. This means ensuring that your equipment is always up to par (i.e., no rickety stools or broken ladders). When hiring a commercial window cleaning company, you should verify that they have proof of insurance in case there is an accident. You don’t want to be stuck holding the bag if someone gets injured on the job.

Using the Wrong Tools

Paper towels and lint-based cloths should be avoided at all times. The materials tend to leave behind fibers that make your windows appear as though they were never cleaned in the first place. Instead, opt for non-toxic solutions that won’t leave residue and marks. For example, any good window washer should have the following items in their toolkit:

  • A bucket
  • Appropriate cleaning solution
  • A large sponge or mop to apply the water
  • A squeegee to remove the water
  • Microfiber cloth
  • Scraper

Not Removing Deposits Before Starting the Cleaning Process

Before a proper window cleaning process can begin, it’s best to remove bird droppings and other dirt and grime that may have accumulated over time. During this stage of window cleaning, it is acceptable to use paper towels. You can also use the scraper and cleaner for stubborn stains. Completing this step first will save you plenty of time and effort.

Attempting to Clean from the Inside-out

Without the proper equipment, you’ll end up stuck trying to clean the exterior windows from the inside. Not only will this yield poor results, but it’s also dangerous. If you require commercial office window cleaning services, be sure to hire trusted professionals to complete the job and make your windows squeaky clean!

If you’re in need of a commercial cleaning service that doesn’t skip over any of the details, contact RJC today.


Follow Us:

Most Popular

Related Posts

Get an Estimate

What is 3+2?